For information on ordering any of these products, contact your distributor. If you do not already have a distributor call MARCOM at 800-654-2448 or email us for help with finding one.

Aerial Lifts in Industrial and Construction Environments: Working With And Around a Lift

Product Line: Regulatory Compliance

Click on the boxes on the right-hand side
of this page for more information.

To view the full-length video click here.
English Spanish

Before you begin work with an aerial lift, you need to know how to inspect it properly, set it up and operate it safely. This doesn't just help to keep you safe…it can make sure everyone on the ground stays safe as well. Falling objects, equipment "tipovers" and even electrocution hazards can make working near an aerial lift risky. Knowing how to operate a lift safely, and being aware of these hazards could save you and your co-workers from serious harm.

MARCOM’s course on "Aerial Lifts in Industrial and Construction Environments: Working With And Around a Lift" is the second of a two-part series that has been designed to meet OSHA's training requirements in their "Mobile Elevated Work Platforms" (MEWPs) standard. The course discusses how to inspect an aerial lift, how to prepare to use a lift, how to operate an aerial lift and how to work on the ground near a lift safely.

Topics covered in the course include:

  • Criteria for Inspecting MEWPs and the Areas Around Them
  • Equipment and Safe Work Practices to Prepare an Aerial Lift for Use
  • Procedures to Follow When Raising a Lift
  • Safely Lowering the Work Platform of a Lift
  • Hazards Associated with Working on the Ground Near an Aerial Lift
  • …and more.

Like all MARCOM courses, "Aerial Lifts in Industrial and Construction Environments: Working With and Around a Lift" uses a powerful combination of full-motion, high-definition video filmed in real world locations, along with audio, text, and colorful graphics to provide the most cost-effective training available today.

The "Aerial Lifts in Industrial and Construction Environments: Working With and Around a Lift" MicroLearning curriculum includes the following 3-5 minute courses:

  • "Inspecting an Aerial Lift and Its Worksite"
  • "Preparing to Use a Lift"
  • "Operating an Aerial Lift"
  • "Wrapping Up Your Work with a Lift"
  • "Working on the Ground Near an Aerial Lift"
39_interactive-online-course Aerial Lifts in Industrial and Construction Environments: Working With And Around a Lift - Marcom LTD

Interactive Online Course

Model Number: ind_413_int_en
Runtime: 30 minutes
Interactive Online Course

MARCOM's mobile-friendly online delivery makes a consistent level of engaging interactive training available to each employee, regardless of their schedules or physical location… and new hires can be trained as soon as they walk in the door.

With no setup, library or subscription fees, this training is available under a number of convenient and affordable licensing and delivery plans.

For a demo on MARCOM's Online Training System,
or to preview any of the available topics click here.

39_adaptive Aerial Lifts in Industrial and Construction Environments: Working With And Around a Lift - Marcom LTD

Adaptive Learning

Model Number: ind_413_adl_en
Runtime: 10-30 minutes
Adaptive Learning

“Adaptive Learning” takes advantage of an employee’s existing knowledge to create training courses that are customized for that employee, and don’t “reteach” them things that they already know. In other words, the Adaptive Learning process determines what an employee already knows about a topic, then structures courses that contain only the information that the employee needs to complete their knowledge of the topic.

These individually customized courses eliminate the largest employee complaint about safety training (“I already know most of this stuff, so why do I have to go through this training again?!”), while potentially recapturing thousands of hours of lost productivity.

MARCOM’s Adaptive Learning courses test employees before they take the course. Then based on the questions that they answer correctly, the course itself determines if the employee knows enough about the information in each chapter in the course to “test out” of that chapter… and if they do, automatically reconfigures the course to skip those chapters.

Reconfiguring the courses in this way typically saves about 50% of an employee’s time in taking a course. Over a year’s time this can recapture a significant amount of lost productivity time for a company of any size, and result in hundreds of thousands of dollars of annual savings.

 

For a demo on MARCOM's Online Training System,
or to preview any of the available topics click here.

39_classroom-training-780-wide Aerial Lifts in Industrial and Construction Environments: Working With And Around a Lift - Marcom LTD

VOD/Video Streaming

Model Number: ind_413_vid_en
Runtime: 14 minutes
VOD/Video Streaming
MARCOM's online VOD/video streaming provides a consistent level of training to each employee, whatever their schedules or physical location… and new hires can be trained as soon as they walk in the door.

Available without setup, library or subscription fees, this training is available under a number of convenient and affordable licensing and delivery plans.
39_microlearning-scorm-box Aerial Lifts in Industrial and Construction Environments: Working With And Around a Lift - Marcom LTD

MicroLearning Curricula (SCORM)

Runtime: 3 - 5 minutes per course
Number of Courses: 5
MicroLearning Curricula (SCORM)
MARCOM’s new MicroLearning courses get employees the training they need, when and where they need it. Built specifically for smartphones and organized into 170 curricula, the more than 1,000 three-to-five-minute micro-courses are available in “Video-Only” or SCORM “Video-Plus-Test” formats.

With no setup or library fees, this training is available under several attractive licensing and delivery options.

To take a look at one of the “Video+Test” MicroLearning curricula and its courses, just click here. For more information or to get a quote on implementing micro-learning at your facility call 800/654-2448.
39_microlearning-vod-box Aerial Lifts in Industrial and Construction Environments: Working With And Around a Lift - Marcom LTD

MicroLearning Curricula (VOD)

Runtime: 3 - 5 minutes per course
Number of Courses: 5
MicroLearning Curricula (VOD)
MARCOM’s new MicroLearning courses get employees the training they need, when and where they need it. Built specifically for smartphones and organized into 170 curricula, the more than 1,000 three-to-five-minute micro-courses are available in “Video-Only” or SCORM “Video-Plus-Test” formats.

With no setup or library fees, this training is available under several attractive licensing and delivery options.

To take a look at one of the “Video-Only” MicroLearning curricula and its courses, just click here. For more information or to get a quote on implementing micro-learning at your facility call 800/654-2448.
11017_rck-413-aerial-lifts-2-dvd Aerial Lifts in Industrial and Construction Environments: Working With And Around a Lift - Marcom LTD

DVD Program

Model Number: V0004139EO
Price: $229.00
Runtime: 14 minutes
DVD Program

DVD programs include an easy-to-use leader's guide, as well as a training certificate, scheduling and attendance forms, and an employee quiz.  These materials are available in PDF format and are stored in a folder on the DVD.

11019_b0001710ex Aerial Lifts in Industrial and Construction Environments: Working With And Around a Lift - Marcom LTD

Booklet

Model Number: B0001710EX
Price: $18.75
Booklet

MARCOM's employee booklets summarize vital information about safety and regulatory compliance topics.

The 16-page, fully-illustrated booklets give employees something to take with them after finishing their training sessions, and reinforce important safety messages. Booklets correspond to each Safety Meeting Kit and Regulatory Compliance Kit topic.

  • Each package contains 15 booklets.
  • All booklets include a one-page quiz.